User`s manual

Confidential Thermal Printer
RS-T80 Programming Manual
- 65 -
6.4 Ethernet interface
 Feature
 Supports 10BASE-T communication
 Compatible with Ethernet II standard frame type
 LEDs indicate network connecting status and data transmission status.
 Supports 9100 port print
 Supports ASB(Auto status back)
 Supports parameter configuration
 Supports firmware program updated online
 Supports printer status query and interface module maintenance based on HTTP.
 Interface signal definition
The parameters of Ethernet interface socket match 10BASE-T standard of IEEE802.3. The
interface signal is defined as below:
Pin Signal name Description
1 TX+ Data sending+
2 TX- Data sending-
3 RX+ Data reception+
4 NC Reserve
5 NC Reserve
6 RX- Data reception-
7 NC Reserve
8 NC Reserve
6.5 WLAN interface
 Features
 Supports 802.11b、802.11g communication
 Supports 9100 port print and LPR print
 Supports ASB (Auto Status Back)
 Supports parameter configuration
 Supports firmware program upgraded online
 Supports HTTP
 Protocols are supported as below
 IP
 ARP
 ICMP
 TCP
 UDP
 DHCP