User`s manual

Confidential Thermal Printer
RS-T80 Programming Manual
- 59 -
4.6 Paper roll loading
4.6.1 Confirm the paper type
After connecting of the printer to the mains voltage, with the host and, if applicable, to
the cash drawer, the paper can be loaded and printed.
4.6.2 Load/replace a paper roll
1) Press the latch of the top cover and open it.
2) Place a paper roll in the paper holder.
3) Close the printer top cover.
Caution:
 If needed remove the paper guide. Choose the suitable paper guide position according
to the width of the paper roll and mount the paper guide. When inserting the paper roll
pay attention to the paper path direction.
Note: Without paper guide: 82.5±0.5mm.
Paper guide in the slot A: 80±0.5mm
Paper guide in the slot B: 57.5±0.5mm
 Ensure that the paper is rolled tightly onto the paper roll, otherwise a paper jam or other
8