User`s manual

Confidential Thermal Printer
RS-T80 Programming Manual
- 58 -
Caution:
 When connecting or disconnecting the power cord, always hold the plug and avoid
dragging it by force.
 Do not pull on the power cord, otherwise the cord may be damaged or broken, causing
a risk of fire or electric shock.
 Do not place the power cord near a heating device, otherwise, the cover of the cord
may melt, causing a risk of fire or electric shock.
 If the printer is not in use for a long period, disconnect the power cord from the wall
outlet for safety.
4.4 Connecting interface cable
1) Ensure the printer power is turned off.
2) Connect the suitable interface cable with the correct connector to the connector of the
interface board of the printer plug screws (Serial interface) or clip springs (Parallel
interface).
3) Connect the other end of the interface cable to the host.
4.5 Connecting the Cash Drawer
1）Ensure the printer power is turned off.
2） Insert the cash drawer cable into the cash drawer connector on the back of the printer.
Caution:
 Cash drawer interface can be connected only with a cash drawer device (Do not
connect a telephone line and so on).