User`s manual

Confidential Thermal Printer
RS-T80 Programming Manual
- 57 -
temperature of the printhead becomes higher than 65
0
C, the protection circuit of the
printer will force the printer to stop printing.
4 Installation
4.1 Unpacking
Check whether all items, that are listed on the packing list are present and in a good
condition. If any items are damaged or missing, please contact your dealer.
4.2 Printer installation
1) The printer should be installed on a flat and stable horizontal surface.
2) The printers should be away from any water source.
3) Do not place the printer on a surface exposed to vibration or risk from impact.
4) Ensure that the printers can be grounded safely.
5) During operation and maintenance of the printer there should be sufficient space around the printer
in accordance with the dimensions as shown in fig. 4.2-1.
4.3 Connecting the Power Adapter
1) Ensure the printer power is turned off.
2）Insert the power cord into the power socket on the backside of the printer.
3）Fix the power cable cord in the printer with a clip as shown in Fig. 4.3-1.