User`s manual

Confidential Thermal Printer
RS-T80 Programming Manual
- 53 -
 L
1
Mark length: 3mm≤L
1
≤10mm.
 L2 Mark length: L
2
≥12mm.
 L3 Distance between marks: 20mm≤L
3
<500mm.
 Mark position: Right, middle or left side on paper(80mm paper only)
 Reflectivity: The reflectivity of the black mark must be less than 15% while the
reflectivity of the paper itself exceeds 85%. There shall be no printed objects like
text and images in the area between the black marks.
Caution:
 The printer will measure the marks during the printing or feeding process. If the
lengths of the mark (L1) is larger than the default value (default: 13mm), the printer
will give a paper-end alarm.
2.4 Print and cut position
2.4.1 Print position
 L1 Paper holder width: 83.5+0/-0.5mm
 L2 Max Print width: 80mm
 L3: Distance between left end of printhead and left side of paper holder(Fixed) 1.8±0.3mm
 L4: Distance between right end of printhead and right side of paper holder(Fixed)
1.8±0.3mm
 L5: Left margin (default:7mm)
 L6: Print area width. Can set by command (See Programming manual), default is
64mm.
 L7: Right margin (default: 9mm)