User`s manual

6. Fasten 2 Screws and

connect one MSR Cable

(USB interface) with MSR

Module

7. Cover the Back cover back and Fasten 2 screws, and re-install the LCM Cover

8. This option is for users who need to customize the MCR configurations for a particular task.

To enter the Configuration Mode, please execute text editor program (such as Microsoft Word,

Notepad…etc.) first, and then press [Ctrl] + [Alt] + [F10]. The following menu will appear

accordingly.

For detailed instruction, please refer to the MSR212 Programmer’s Manual

Note: If the MCR does not work normally, please refer to troubleshooting.