User`s manual

Confidential
RS-T80 Programming Manual
- 136 -
[Relative] GS ^
GS V m GS V m n①②
[Function] Select cut mode and cut paper
[Format] ①ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
②.ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] ①m = 0, 48, 1, 49
②m = 66, 0 ≤ n ≤255
[Notes] Selects a mode for cutting paper and executes paper cutting. The value of m
selects the mode as follows:
m Cut mode
0,48 Full cut
1,49 Partial cut
66
Feeds paper (cutting position + [ n × (vertical motion unit)]), and
cuts the paper partially.
[Notes ①] · This command is effective only processed at the beginning of a line.
[Note ②] · This command is effective only processed at the beginning of a line.
· When = 0, 48, 1, 49, the printer cut paper directly.
·When = 66, the printer feeds the paper to (cutting position + [ n × vertical
motion unit]) and cuts it.
· The horizontal and vertical motion unit are specified by GS P
· Paper feed amount is accounted by portrait moving unit.
GS ^ r t m
[Function] Execute macro
[Format] ASCII GS ^ r t m
Hex 1D 5E r t m
Decimal 29 94 r t m
[Range] 0 ≤ r ≤ 255
0 ≤ t ≤ 255
m = 0, 1
[Description] Executes a macro.
· r specifies the number of times to execute the macro.
· t specifies the waiting time for executing the macro.
· m specifies macro executing mode.