User`s manual

Confidential
RS-T80 Programming Manual
- 126 -
· With a parallel interface model, this command can not be executed when the
printer is busy.
· When the printer is disabled with ESC = (Select peripheral device), the
command is still available.
·Do not insert the command into the data sequence of over 2 or more bytes.
[Relative] DLE EOT
DLE DC4 n m t
[Function] Generate pulse at real-time to open cash drawer
[Format] ASCII DLE DC4 n m t
Hex 10 14 n m t
Decimal 16 20 n m t
[Range] n = 1
m = 0, 1
1 ≤ t≤ 6
[Description] Outputs the pulse specified by t to connector pin m as follows:
m Connector pin
0 Drawer kick-out connector pin 2
1 Drawer kick-out connector pin 5
The pulse ON time is [t × 100 ms] and the OFF time is [ t × 100ms].
[Notes] · When the pulse is output to the connector pin specified while ESC p or DEL
DC4 is executed while this command is processed, this command is ignored.
· The printer executes this command upon receiving it with a serial interface
model.
·this command cannot be executed when the printer is busy with a parallel
interface model.
·If print data includes the same character strings as this command, the
printer performs the same operation specified by this command. The user
must consider this.
·This command is effective even when the printer is disabled with ESC =
(Select peripheral device).
·Do not insert the command into the data sequence of over 2 or more bytes.
[Relative] ESC p
ESC 2
[Function] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50