User`s manual

Confidential
RS-T80 Programming Manual
- 125 -
GS w n
[Function] Set bar code width
[Format] ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range] 2 ≤ n ≤ 6
[Description] Set the horizontal size of the barcode.
n specifies the bar code width as follows:
n
Module Width (mm) for
Single -level Barcode
Binary-level Barcode
Thin element width (mm) Thick element width (mm)
2 0.25 0.25 0.625
3 0.375 0.375 1.0
4 0.5 0.5 1.25
5 0.625 0.625 1.625
6 0.75 0.75 1.875
· Single-level bar codes are as follows:
UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, CODE128
· Binary-level bar codes are as follows:
CODE39, ITF, CODABAR
[Default] n = 2
[Relative] GS k
2.7 Other commands
DLE ENQ n
[Function] Real-time request to printer
[Format] ASCII DLE ENQ n
Hex 10 05 n
Decimal 16 5 n
[Range] 1 ≤n ≤ 2
[Note] n specifies the requests as follows:
n Request
1 Recover from an error and restart printing from the line where the error occurred
2 Recover from an error after clearing the receive and print buffers
· This command is effective only when an auto-cutter error occurs or printer
can not find
print mark.
· The printer starts processing data upon receiving this command under serial
mode.