User`s manual

Confidential
RS-T80 Programming Manual
- 119 -
1- 3 Undefined
4 Off 00 0 Not used. Fixed to Off
5,6 Undefined
7 Off 00 0 Not used. Fixed to Off.
[Relative] DLE EOT, GS a
2.6 Barcode command
GS H n
[Function] Select printing position for HRI characters
[Format] ASCII GS H n
Hex 1D 48 n
Decimal 29 72 n
[Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Description] Selects the printing position of HRI characters when printing a barcode.
n selects the printing position as follows:
n Printing position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code
[Notes] · HRI indicates Human Readable Interpretation.
· HRI characters are printed using the font specified by GS f.
[Default] n = 0
[Relative] GS f, GS k
GS f n
[Function] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
0,48
Font A (12 × 24)
1,49
Font B (9 × 17)
[Notes] · HRI indicates Human Readable Interpretation.
· HRI characters are printed at the position specified by GS H.
[Default] n = 0