User`s manual

Confidential
RS-T80 Programming Manual
- 116 -
6
0 00 0 No error.
1 40 64 Error occurs
7 0 00 0 Not used. Fixed to 0
n = 3: Error status
Bit 0/1 Hex Decimal Function
0 0 00 0 Not used. Fixed to 0
1 1 02 2 Not used. Fixed to 1
2 - - - Undefined
3
0 00 0 No auto-cutter error
1 08 8 Auto-cutter error occurs.
4 1 10 16 Not used. Fixed to 1
5 0 00 00 Not used. Fixed to 0
6
0 00 0 Temperature of printhead is normal
1 40 64 Temperature of printhead is abnormal
7 0 00 0 Not used. Fixed to 0
n = 4: Paper feeding status
Bit 0/1 Hex Decimal Function
0 0 00 0 Not used. Fixed to 0
1 1 02 2 Not used. Fixed to 1
2,3
0 00 0 Non-paper near status
1 0C 12 Paper near end status
4 1 10 16 Not used. Fixed to 1
5,6
0 00 0 Paper present
1 60 96 Paper end
7 0 00 0 Not used. Fixed to 0
Please avoid to insert this command between 2 or more byte command.
For Example：
In the process of sending ESC 3 n to printer, DTR become to MARK(DSR is
used to host) before sending n and DLE EOT 3 interupted before receiving n,
then the printer take code<10>H of DLE EOT 3 as code <10>H of ESC 3.
[Relative] DLE ENQ, GS a, GS r
GS a n
[Function] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 ≤ n ≤ 255
[Notes] Enables or disables ASB and specifies the status items to include. The return
information are as follows:
· When n is not equal to 0, the printer automatically transmits the status
whenever the enabled status item changes.