User`s manual

Confidential
RS-T80 Programming Manual
- 112 -
FS p n m
[Function] Print NV bit image
[Format] ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] 1 ≤ n ≤ 255
0 ≤ m ≤ 3, 48 ≤ m ≤51
[Notes] Prints a NV bit image n using the mode specified by m.
m Mode Vertical Resolution (DPI) Horizontal Resolution (DPI)
0.48 Normal 203 203
1.49 Double-width 203 101
2.50 Double-height 101 203
3.51 Quadruple 101 101
· n is the number of the NV bit image (defined using the FS q command).
· m specifies the bit image mode.
· NV bit image means a bit image which is defined in a non-volatile memory
by FS q and printed by FS p.
· This command is not effective when the specified NV bit image has not been
defined.
· In standard mode, this command is effective only when there is no data in
the print buffer.
· This command is not affected by print modes (emphasized, double-strike,
underline, character size, white/black reverse printing, or 90° rotated
characters, etc.), except upside-down printing mode.
· If the downloaded bit-image to be printed exceeds one line, the excess data is
not printed.
· After printing the bit image, this command sets the print position to the
beginning of the line and processes the data that follows as normal data.
[Relatives] ESC *, FS q, GS /, GS v 0
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Function] Define Flash bit image
[Format] ASCII FS q n [ xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n
Hex 1C 71 n [xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n