User`s manual

Confidential
RS-T80 Programming Manual
- 104 -
FS &
[Function] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Notes] When the kanji character mode is selected, the printer checks whether the
code is for Kanji or not, then processed the first byte and the second byte if
the code is for Kanji.
· Kanji codes are processed in the order of the first byte and second byte.
· Kanji character mode is not selected when the power is turned on.
[Relative] FS ., FS C
FS - n
[Function] Turn underline mode on/off for Kanji characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Turns underline mode for Kanji characters on or off, based on the following
values
of n.
n Function
0, 48 Turns off underline mode for Kanji characters
1, 49 Turns on underline mode for Kanji characters (1-dot thick)
2, 50 Turns on underline mode for Kanji characters (2-dot thick)
[Notes] The printer can underline all characters (including right- and left-side
character spacing), but cannot underline the space set by HT and 90°
clockwise-rotated characters.
After the underline mode for Kanji characters is turned off, underline printing is
no longer performed, but the previously specified underline thickness is not
changed. The default underline thickness is 1 dot.
The specified line thickness does not change even when the character size
changes.
It is possible to turn underline mode on or off using FS !, and the last received
command is effective.
[Default] n = 0
[Relative] FS !
[Demo] Refers to ESC_