User`s manual

Confidential
RS-T80 Programming Manual
- 103 -
41 41 41 42 42 42 0A
1D 42 00（Turn white/black reverse mode off）
41 41 41 42 42 42 0A
Results:
FS ! n
[Function] Set print mode(s) for Kanji characters
[Format] ASCII FS ! n
Hex 1C 21 n
Decimal 28 33 n
[Range] 0 ≤n ≤ 255
[Description] Sets the print mode for Kanji characters, using n as follows:
Bit 0/1 Hex Decimal Status for ASB
0, 1 Undefined
2
0 00 0 Double-width mode is OFF
1 04 4 Double-width mode is ON
3
0 00 0 Double-height mode is OFF.
1 08 8 Double-height mode is ON
4-6 Undefined
7
0 00 0 Underline mode is OFF
1 80 128 Underline mode is ON
[Notes] When both double-width and double-height modes are set (including right-
and left-side character spacing), quadruple-size characters are printed.
· The printer can underline all characters (including right- and left-side
character spacing), but cannot underline the space set by HT and 90°
clockwise-rotated characters.
· The thickness of the underline is that specified by FS -, regardless of the
character size.
· When some of the characters in a line are double or more height, all the
characters on the line are aligned at the baseline.
· It is possible to emphasize the Kanji character using FS W or GS !, the
setting of the last received command is effective.
· It is possible to turn under line mode on or off using FS -, and the setting of
the last received command is effective.
[Default] n = 0
[Relative] FS-, FS W, GS !
[Demo] Refers to ESC !