User manual

BTP-R580 USER MANUAL
- 23 -
3) Close the printer top cover.
Caution:
 If needed remove the paper guide. Choose the suitable paper
guide position according to the width of the paper roll and
mount the paper guide. When inserting the paper roll pay
attention to the paper path direction (see Fig. 4.6.2-2).
Fig. 4.6.2-3
Note: Without paper guide: 82.5±0.5mm.
Paper guide in the slot A: 80±0.5mm
Paper guide in the slot B: 57.5±0.5mm
 Ensure that the paper is rolled tightly onto the paper roll,
otherwise a paper jam or other fault could happen.
 The paper roll should be placed straight in the paper holder and
not slantingly. The paper roll should be able to move freely.
4.7 Paper near end position adjustment
Through adjustment of the latch of the paper near end sensor to a
corresponding level, different paper roll cores can be