User's Manual

_______________________________________________________________________
Page 5 of 6
For the 3 guest service buttons of the base:
Off-hook status, the 3 buttons are M1, M2 and M3 of the cloner;
MWL is M0 of the cloner
On-hook status, press each button for 5s, it will be M8,M9 and
M10 of the cloner. MWL is M11 of the cloner.
For the 3 guest service button of the handset:
They are the M4, M5 and M6 of the cloenr. In order to make it
work, please set as followed solution:
On-hook status, press the handset’s HOLD+*+HOLD+ certain
guest service button
2) Program the service button of the handset by hand:
Press HOLD+telephone number + HOLD+ service button.
To delete the programmed number: Press HOLD+HOLD+
service button.
10. Handset registration
On-hook status, press base’s VOL button for 5s, the MWL will turn
on, the MWL will turn off after 5s, then press handset’s
HOLD+*+HOLD+MUTE. It will be successful if the handset rings.