User's Manual

_______________________________________________________________________
Page 4 of 6
3. Make a Call
Press button of the handset or SPKR of the base, then dial the
telephone number.
4. Answer a call
Please press the handset’s button or the base’s SPKR button
or directly pick up the handset.
5. Hold
Press HOLD button will enter hold mode, press button will
release it.
6. Mute
Press Mute btton will enter mote mode, press mute button again will
release it.
7. The communication between the base and the handset
1) Press button will make the handset enter or get out of speaker
mode.
2) Press the SPKR button of the base and press the handset’s
button will make the base enter speaker mode.
3) Press the handset’s button or directly pick up the handset will
make the base enter on-hook status.
In order to make this feature work, please do the followed settings:
Press handset’s HOLD +*+ HOLD+5.
Or need press base’s speaker button.
8. The use of the guest service
Off-hook, directly press certain guest service will dial the
programmed telephone number.
On-hook, press certain guest service button for 5s can also dial the
programmed telephone number.
9. Program the guest service button
1) Program by cloner
Step 1: Please choose DSPG mode, then input the programmed
telephone number.
Step 2: Keep the handset off-hook mode, press *#8#, then put
the handset back to cradle or press .
Step 3: Press cloner’s SEND/ STOP button for 3s.