User's Manual

4.2 Network status
Telephone can obtain IP address from DHCP server in default mode.
Enter WEB interface to configure all related settings in accordance
with real network environment.
WAN IP Mode
Select WAN port IP address obtainment
modes including static/ DHCP/ PPPoE/ Bridge.
MAC Address
Clone
Enable MAC address clone or not
NAT Enable
Activate NAT function or not.
VLAN Mode
Activate VLAN mode or not
VLAN ID
Set VLAN ID
DNS Mode
If DNS mode is Manual, user needs to set
primary DNS and secondary DNS manually. If
DNS mode is Auto, IP phone will obtain
primary DNS and secondary DNS from DHCP
server automatically.
Primary DNS
The Primary DNS setting
Secondary DNS
The optional DNS setting
IP Address
The network port IP address
Subnet Mask
The network port subnet mask
Default
Gateway
The network port default gateway
Note:
1) When telephone IP address is switched from DHCP to static
mode, all parameters such as IP address, Subnet Mask, Default
Gateway and DNS need to be set manually.
2) Save and apply switched IP address settings and reboot the
phone for new IP address obtainment. Make sure the network is
normal during daily using.
4.3 SIP Account Setting
Phone regular usage ,only need to configure Proxy Server, Display