User's Manual

2). Default mode:
After on-hook, the last dialed number will disappear
automatically within five minutes.
9.MWL Message Waiting Light
When there is new message, the MWL will flash, press MWL key
can retrieve the message
10. Handset call and speaker call and cordless handset call’s
inter-converting
1)．From handset call to Speaker call:
Press SPKR key, then put the handset back
2). From Speaker call to Handset call:
Press SPKR of the handset again.
3). From Handset to Base:
When Handset is calling, press SPKR of the base,
then press OFF key of the handset.
4) From Base to Handset::
When Base is speaker mode, press SPKR of
the handset and press SPKR of the
base, it will enter handset speaker mode.
If you press ON key of the handset and
press SPKR of the base again, it will
enter handset Non-speaker mode.
Restore Factory
When the phone is powered on, after boots up successfully, press 3
when enter the voice menu, enter the phone password + # Key to
restore factory, after all finished please reboot the phone.
POE power supply instructions
The phone can view the POE power supply level by managing the
POE switch. If powering the sound or charging stand, the power
level is 0 or 6 and the maximum value is 12.95W; If only powering a