User's Manual

4. Service Button
1). Off-hook mode, press certain service key to dial the number
directly.
2). How to Store:
Keep the base in on-hook mode, press HOLD+ Desired number
+ Service key / MWL key. There will be indicating tone if succeed.
For the handset, in on-hook mode, press HOLD + *+HOLD+N+M
of the base (N=1,2 or 3, which stands for the location of the service
button of the handset; M stands for the service button of base) .
For example, if you want to program the 2
nd
service button of
the handset and the desired number is same as the 7
th
service
button of the base, the solution is:
On-hook status, press HOLD + *+HOLD+N+M of the base, then
press 2 and press the 7
th
service button of the base.
3). How to delete:
On-hook mode, press HOLD+HOLD+ service key / MWL key
of the base. Please make sure that there is power.
5. Using the hold key
Press HOLD key, the indicator will turn on, the current line is held,
press HOLD key again or press ON/ SPKR of the handset or
press SPKR of the base can release the hold mode.
6. Mute
Off-hook mode, press MUTE key once to stop the sending, press it
again to remove the mute mode (Base with LED indicator).
7. Adjust the call volume
1). Press VOL+ or VOL- of the base to adjust the volume. Total are
five levels.
2). Press VOL+ or VOL- of the handset to adjust the volume. Total
are five levels.
8. To redial the last number dialed and Call the handset
1). Off-hook, press REDIAL key of the base or the handset to
dial the last number dialed.