User's Manual

Press number key 2 if A, B, C, a, b, c is to be entered.
Press number key 3 if D, E, F, d, e, f is to be entered.
Press number key 4 if G, H, I, g, h, i is to be entered.
Press number key 5 if J, K, L, j, k, l is to be entered.
Press number key 6 if M, N, O, m, n, o is to be entered.
Press number key 7 if P, Q, R, S, p, q, r, s is to be entered.
Press number key 8 if T, U, V, t, u, v is to be entered.
Press number key 9 if W, X, Y, Z, w, x, y, z is to be entered.
When using the keyboard to enter the password, other characters
can be replaced by number key 0.
When entering IP address, use “*” to replace “.”; for example, if the
IP address is 192.168.10.100，enter 192*168*10*100 instead.
4) Press * key one time to return to the menu; press * key twice to
return to the menu if in IP address entering status.
5) Hanging off the phone can exit the voice menu.
Basic Operation of Phone
1. To register the Handset
1)On-hook status, press HOLD+*+HOLD+MUTE of the base
( the indicator of SPKR, MUTE and HOLD will flash),
2) Press HOLD+*+HOLD+MUTE of the cordless handset,
3) After 5-8s, press REDIAL/PG key of the base.
4) The handset will ring, which means successful.
2. Off-hook
Press ON or SPKR of the handset or press SPKR button of the
base.
3. On-hook
1). Put the handset back to the base or press SPKR again
2). Please press OFF key of the handset or put the Handset back
to the charging base
3) Press SPKR button again if it’s in speaker mode.