User Manual

When making washing, especially with high pressure, make sure
distance between the nozzles and object is enough otherwise damage
to the object may occur.
When the time slot of not use the machine for more than 5 min, please
cut off the machine and press the gun trigger to release the pressure.
The working pressure of the machine is set from the factory and the
user should not adjust it higher, otherwise the machine may be damaged.
It is normal that when it is working, there may be some water drops out
form the water discharge holes in the pump juncture.
When you want to stop the machine, please follow steps as below:
1. Switch off the machine
2.pull the plug off from the socket
3 cut off the water supply (if the water is supplied from the tap).
4. Press the trigger of the spray gun to release the pressure.
The accessories like gun and hose matter the performance, so please
take care of them any time.
If the motor cannot work, please turn it off at once, or it may be burned.
ELECTRIC PRESSURE WASHER
10
OPERATING
INSTRUCTIONS