USER MANUAL S3 S5 S7 Electric Pressure Washer
ELECTRIC PRESSURE WASHER THANK YOU FOR CHOOSING SHAKTI TECHNOLOGY ELECTRIC PRESSURE WASHER PLEASE READ THE OWNER'S MANUAL AND SAFETY INSTRUCTIONS CAREFULLY BEFORE OPERATING THE ELECTRIC PRESSURE WASHER. SAVE THIS MANUAL FOR FUTURE REFERENCE. IF YOU HAVE ANY PROBLEMS AND QUESTIONS, PLEASE CONTACT US.
ELECTRIC PRESSURE WASHER TABLE OF CONTENT Product Description 04 Technical Specification 05 Know Your Product 06 What’s in the Box 07 Assembly Instructions 08 Operating Instructions 10 Maintenance 11 Troubleshooting 12 Contact Us 14 03
ELECTRIC PRESSURE WASHER PRODUCT DESCRIPTION This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc. Never use the machine in potentially explosive areas under any circumstances! Do not use water that is dirty, gritty, or contains any chemical products, as these could impair operation and shorten the life of the machine. This unit can be placed horizontally. Do not step on when placed horizontal.
ELECTRIC PRESSURE WASHER TECHNICAL SPECIFICATION Specification S3 S5 S7 Motor 1800W 1900W 2100W Max Flow Rate 06 L/min 08 L/min 10 L/min Rated Pressure 120 Bar 125 Bar 130 Bar Voltage 220-240V 220-240V 220-240V 05
ELECTRIC PRESSURE WASHER KNOW YOUR PRODUCT 1 2 3 4 5 Inlet Pipe Water Bucket Filter Inlet Quick Connector Inlet Crystal Filter Outlet Pipe 6 7 8 9 Pressure Gun Soap Dispenser Main Unit Extention Rod Water Outlet On / Off Switch Carrying Handle Pressure Gadge 7 Water Inlet 8 3 1 6 5 9 4 2 **All details will remain same for S3 & S7 Model Also 06
ELECTRIC PRESSURE WASHER WHAT’S IN THE BOX Electric pressure washer Pressure gun Outlet Hose Pipe Inlet Pipe Needle clean-out tool Inlet Filter Set Soap Dispenser User's manual IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts.
ELECTRIC PRESSURE WASHER ASSEMBLY INSTRUCTIONS 08
ELECTRIC PRESSURE WASHER OPERATING INSTRUCTIONS When making washing, especially with high pressure, make sure distance between the nozzles and object is enough otherwise damage to the object may occur. When the time slot of not use the machine for more than 5 min, please cut off the machine and press the gun trigger to release the pressure. The working pressure of the machine is set from the factory and the user should not adjust it higher, otherwise the machine may be damaged.
ELECTRIC PRESSURE WASHER MAINTENANCE Replace Engine Oil Regularly (Oil grade 15W-40) A.After first 20 hours' working, the engine oil must be replaced, (60-70ml oil can be filled). B.Replace the second time after another 50 hours' working and replace the oil regularly after each 100 hours' working. Turn off the machine when you make maintenance for the machine A. If the machine will be in storage for a long time, the left water in the pump much be drained off completely.
ELECTRIC PRESSURE WASHER Problem The motor won't run or stop running when it is working. The nozzle cannot spray water or spray water in low pressure. Cause Possible Solution 1) No power supply or poor connect between the plug and socket. 1) Examine the power supply and make the plug & socket well connected. 2) The switch or remote control switch may be broken, or the battery depleted. 2) Repair or replace the switch, or replace the battery. 3) The voltage of the power is too low.
ELECTRIC PRESSURE WASHER Problem Pressure unloads. Cause Possible Solution 1) Pressure valve leaking water. 1) Replace some O-rings or go to agent for repairs. 2)Pressure loader clogged 2) Clear pressure loader. 3)Mushroom nail worm off 3) Replace the Mushroom nail. 4) Connecting between gun 4) Tighten the connecting and hose leaking or gun or replace the gun. leaking. Water leaking on the pump. Oil leaking on the pump.
ELECTRIC PRESSURE WASHER ! Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment. This is indicated by the symbol on the product, user manual or packaging.
