Manualshelf

User Guide

ManualsBrandsSHAKS ManualsAccessoriesS5b Wireless Gamepad Controller for Android, Windows, iOS and Supporting X-Cloud, Stadia, Geforce - Portable Mobile Game Controller, Powered by Qualcomm can fit up to iPhone XS Max
12345678910
S5b Product & Service Manual 5
Connecting with iOS device
1. Mode setting: Power off, change the mode to 'iOS Switch', and power it on.
2. Connecting: Please proceed “Pairing” process and check Bluetooth name “Xbox Wireless
Controller”. If you did pair it already, S5b will be automatically repaired.
3. When pairing is successful: LED signals #2,3,5 turn off and #1,4 light up.
Connecting on Mapping Mode (for Android only)
1. Mode setting: Power off, change the mode to 'Mapping Switch', and power it on.
2. Connecting: Please proceed “Pairing” process and check Bluetooth name “SHAKS S5b xxxx
mapping” in the BT list of your device. If there are paired devices before, gamepad will do
“Reconnect”.
3. When pairing is successful: LED signals #2,3,4,5 turn off and #1 lights up.
4. Now you are ready to play games with mapped keys on your device! Only when you are in
the mapping mode you can use touch keys as gamepad controllers that you set up.
💡
Note) If you want to play mapping mode at the same Android device, please
delete “SHAKS S5b xxxx Android” from your device BT setting, then newly
connect it in Mapping Mode (for Android only)”. It is same vice versa.
Wired connecting with a USB Cable for Windows, Android device
1. Connecting: Power off, then keep pressing ‘Pairing Button’, then connect to the host device
using a USB cable
(Sequence Important - 1st pressing and then power connect). The host
device will detect the gamepad automatically.
2. When completed: LED signals #2,3,4,5 turn off and #1 lights up.
Tips)
Recommended to use Windows 10 or later. If you are using Windows 7, please install “Xbox
360 driver” driver first on your PC that you can find on our website
.
With USB C to USB C cable, you can use “wired mode” with a smartphone, connecting
as "Xbox compatible gamepad". It follows X-input protocol.
Reset & Initializing to recover setup process
If any issue during setup, please reset the gamepad and your device as below.
1. Press ‘Pairing Button’ for 6 seconds longer to delete the stored BT profiles
2. On your device’s Bluetooth setting, delete all paired profiles regarding the gamepad completely to
disable the auto-searching trial.
3. Booting your device again to confirm all cached log deleted or waiting for a while (3 seconds,
automatically deleting process)
4. And repeat normal 3 step connection. 99.9% will be a success !!