User Guide

S5b Product & Service Manual 30
https://play.google.com/store/apps/details?id=com.aksys.shaksapp
Compatible Gamepad
This app is compatible with SHAKS S2, S2i, S3i, S5i, or S5b and its future version.
💡
iOS, Windows, Android 6.0 less (Samsung Note) are not supported. SHAKS S1+ can be
used with ShootingPlus V3.
Firmware update to the latest one
Inside of application setting, you can click to upgrade firmware. The update will be made only in cable-
connected status to avoid any potential damage run by the battery.

This manual is written for firmware S2i (200012), S3i(300013), S5i/b (300013), and later
versions.
Back to Contents
Connection to phone, TV screen
Gamepad mode set and connection
For mapping service, you must connect it in "Mapping mode". Mapping and Android mode are two
different modes. Android phones can pair each one of two-mode. Switching between two-mode
(Android ↔ Mapping), please DELETE the previously paired log, and pairing newly once again.
Please click to see the mode and paring section in each model's manual. Unless switching the model, it
can be repaired automatically previously set.
Note) Connected, but appearing "mode(error)" message
This message comes out because the phone is connected to
Android mode. So, such a connection log must be deleted and
be paired newly.
Solution 1: Select "Delete" and pair Bluetooth again
Solution 2: if above 1 is not workable, do
1. Go to smartphone Bluetooth setting
2. Search gamepad paired in the list
3. Delete its connection log
4. Close the setting menu
Gamepad mode changed, but the phone
connect it under the previous mode (i,e
android mode)