User Manual

Installation Instruction for Shadow SH 2001

Quick Mount Removable Transducer

Fax: (561) 743 0460

eMail: jjmelch@shadow-pickups.com

Shadow Elektroakustik

Peter-Haendel Straße 2

91334 Hemhofen · Germany

Shadow Electronics of America Inc.

17791 Alexander Run

Jupiter, FL 33478 U.S.A.

Fax: +49 - 91 95 - 92 99 30

eMail: info@shadow-electronics.com

Content:Content:

Transducer

output socket

cable

mounting adhesive

Note:

Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we

recommend an amplifier with low impedance input.

Fig. 1

1. Locate the best position on the instrument for optimum sound quality and output. See suggested locations in fig. 1.

2. Apply an even amount of included adhesive to the bottom of the pickup.

3. Press pickup firmly onto the instrument.

4. Position the included output cable in a convenient location.

5 . Connect to an ppropriate amplifier with included instrument cable.

PAGE 1
Installation Instruction for Shadow SH 2001 Quick Mount Removable Transducer Content: Transducer output socket cable mounting adhesive 1. Locate the best position on the instrument for optimum sound quality and output. See suggested locations in fig. 1. 2. Apply an even amount of included adhesive to the bottom of the pickup. 3. Press pickup firmly onto the instrument. 4. Position the included output cable in a convenient location. 5 . Connect to an ppropriate amplifier with included instrument cable.