SCM-ZC-KIT MULTI-ZONE LIGHTING CONTROLLER KIT INSTALLATION & OPERATION MANUAL W W W. S H A D O W- C A S T E R .
SCM-ZC-KIT OPERATION MANUAL TABLE OF CONTENTS SCM-ZC-KIT BOX CONTENTS ........................................................................................................................................ 3 SCM-ZC-KIT OVERVIEW .................................................................................................................................................3 SCM-ZC-KIT TYPICAL WIRING DIAGRAM ......................................................................................................
SCM-ZC-KIT OPERATION MANUAL SCM-ZC-KIT BOX CONTENTS PRODUCT SERIAL NUMBER • Multi-Zone Lighting Controller (SCM-MZ-LC) • Zone Controller Remote (SCM-ZC-REMOTE) • 1m Shadow-NET® Communication Cable (SCM-SCNET-01) • 4 x SS316 Pan Head 8 x ¾" Mounting Screws • Installation & Operation Manual • Warranty and Registration Information You can add your product serial number here for warranty and product registration purposes. The serial number is located on a white label inside the housing of the SCM-MZ-LC.
SCM-ZC-KIT OPERATION MANUAL SCM-ZC-REMOTE OPERATION The Shadow-Caster® SCM-ZC-REMOTE provides individual or simultaneous control of 4 independent lighting zones when connected to the Multi-Zone Lighting Controller (SCM-MZ-LC). Use the tactile keypad to quickly change colors, brightness and lighting effects such as multi-color fade and music synchronization. All Zones / Power On Turn Off / Save Color Buttons Zones 1-4 Previous Color Next Color Increase Brightness Decrease Brightness MUSIC SYNC 1.
SCM-ZC-KIT OPERATION MANUAL ADJUST BRIGHTNESS MUSIC SYNC Select the desired zone(s) and use the buttons. E.g. Press 3 then down by 2 steps. turns zone 3 brightness Select the desired zone(s) and press a color (white, red, green or blue) or press or to advance to the previous/next color in the Color Index (see Color Index Cycle below). E.g. Press ALL then turns all zones red.
SCM-ZC-KIT OPERATION MANUAL INSTALLATION SCM-ZC-REMOTE INSTALLATION POWER REQUIREMENTS The backlit lighting controller should be panel mount installed in an easy to reach location. The sealed keypad is washdown rated (IP66) and installation in exposed areas is acceptable. See the Shadow-Caster® wire awg recommendations for detailed calculations. It is very important to have sufficient gauge wire feeds for RGB lighting. 1. Drill a 3" diameter mounting hole. 2.
SCM-ZC-KIT OPERATION MANUAL SHADOW-NET® DEVICES Connect Shadow-NET enabled devices to the orange and yellow Shadow-NET® wires coming from the MultiZone Lighting Controller. ® As soon as the Multi-Zone Lighting Controller receives power, multiple channels of digital messages start broadcasting on these wires. These messages allow Shadow-NET® enabled devices to be connected without a switch. Initially these commands instruct attached lights to turn off.
AUG21 Designed & Manufactured in Clearwater, FL © 2021 Shadow-Caster® LED Lighting, All Rights Reserved Shadow-Caster® LED Lighting | 2060 Calumet Street. | Clearwater, FL 33765 p: 1+ 727.474.2877 e: info@shadow-caster.com w: shadow-caster.
r.hadaw-casler.cam ~ LED LIGHTING r.hadaw-caslllt:cam Zone Controller Remote ~ LED LIGHTING OPERATION GUIDE The Shadow-Caster Lighting Controller Remote (SCM-ZC-REMOTE) provides individual or simultaneous control of 4 independent lighting zones when connected to the Multi-Zone Lighting Controller (SCM-ZC-SA). This Controller Remote will only work in conjunction with the Lighting controller and not as a standalone unit.
fshadaw-casler.i:am ~ LED LIGHTING fshadaw-casler.i:am ~ LED LIGHTING Zone Controller Remote OPERATION" GUIDE Changing Colors Select desired zone(s) and press a colorO - - - G or · to advance to the next color and previous color in the color index. Example: fD then turns All Zone red.
SCM-ZC-KIT with Shadow-NET® Lights & 4 Zones of RGB Lights Standard Layout HOW TO OPERATE SCM-MZ-LC SCM-ZC- REMOTE Multi-Zone Lighting Controller Zone Controller Remote All Press twice to turn all zones on Zone (1-4) Press and then set desired color and effect for the zone 12V Power Source Mode Press to step through modes: Single Color Fade / Multi-Color Fade / Multi-Color Change / Strobe 3.
P R O D U C T D A T A S H E E T MARINE GRADE MULTI-ZONE RGBW LIGHTING CONTROLLER SCM-ZC-KIT DESCRIPTION Control all of your boat or recreational vehicle’s RGB lighting with Shadow-Caster®’s easy to use multi-zone push button lighting controller. Our unique system provides 4 independent zones of color, brightness, multiple fade, strobe and music sync modes. The waterproof back lit controller can be mounted conveniently at your helm for quick and easy access.
P R O D U C T D A T A S H E E T MARINE GRADE MULTI-ZONE RGBW LIGHTING CONTROLLER SCM-ZC-KIT O P T I O N A L S H A D O W- N E T ® C A B L E S SCM-SCNET-02 2 Meter Cable SCM-SCNET-04 4 Meter Cable SCM-SCNET-Y Y Cable for Adding SCNET Control Devices A D D I T I O N A L S H A D O W- N E T ® D E V I C E S SCR-24-CC Full Color Underwater LED Lights SCM-10-CC 4 Color Underwater LED Light Designed & Manufactured in Clearwater, FL © 2020 Shadow-Caster ® LEDs. All Right Reserved.
