Owner's Manual
Table Of Contents
- Installation & Operation Manual
- Product Info
- SCM-MFD-LC-KIT & SCM-PD-RELAY-4 with SCR Underwater Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT & SCM-SNLC with 6 Switch Inputs, Shadow-NET® Lights & 5 Zones of RGB Lights
- SCM-MFD-LC-KIT with 2 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 3 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 6 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with Shadow-NET® Lights & 4 Zones of RGB Lights
MUSIC SYNC CONFIGURATION
Select Type of Sync:
Single
Lights illuminate on a 'single' selectable color and pulse
with the amplitude of the music.
Multi
Lights cycle through all available colors of at a
xed rate, but similar to Single mode, pulse with the
amplitude of the music.
Falloff
Intensity of lights increases with the beat, and then falls
off at a xed rate.
Frequency
Drives colors based on the frequency content of the
music. Provides the best music sync functions.
OPTIMIZING MUSIC SYNC
1. Turn music to typical listening volume, and press
PAUSE on your stereo system. This will provide the
lighting controller with an input signal representative
of the audio system background noise.
2. Adjust the sensitivity down 1 step at a time until the
lights do not blink or icker - this sets the system
sensitivity to just above the audio systems noise
oor.
3. Resume music. The lights should now be changing
in sync with the music input.
SCM-MFD-LC-KIT
OPERATION MANUAL
9
Designed & Manufactured
in Clearwater, FL
© 2021 Shadow-Caster
®
LED Lighting, All Rights Reserved
CONNECTING THE SCM-MFD-BRIDGE
& INITIAL SYNCING
The SCM-MFD-BRIDGE is designed to automatically
detect the brand of MFD it is connected to and
establish a connection. Once the onboarding process is
complete, and this information is veried, this step will
not have to be repeated.
If the system does not establish a connection at initial
startup:
CYCLE THE POWER OF JUST THE MFD BRIDGE, BY
REMOVING THE 4 PIN CONNECTOR AND WAITING 10
SECONDS, AND THEN RECONNECT.
If the SCM-MFD-BRIDGE is moved from one brand
display to another, a factory reset must be initiated on
the screen prior to disconnecting.
Once the SCM-MFD-BRIDGE is properly connected, the
Shadow-Caster
®
app icon will appear on the home
screen or gauges accessories scene. Simply click on
this icon to open the application.
Note: In the case of Raymarine MFDs, this icon is
already there and not an indication of connectivity.