Owner's Manual
Table Of Contents
- Installation & Operation Manual
- Product Info
- SCM-MFD-LC-KIT & SCM-PD-RELAY-4 with SCR Underwater Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT & SCM-SNLC with 6 Switch Inputs, Shadow-NET® Lights & 5 Zones of RGB Lights
- SCM-MFD-LC-KIT with 2 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 3 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 6 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with Shadow-NET® Lights & 4 Zones of RGB Lights
SCM-MFD-LC-KIT
OPERATION MANUAL
7
Designed & Manufactured
in Clearwater, FL
© 2021 Shadow-Caster
®
LED Lighting, All Rights Reserved
SHADOW-CASTER
®
LIGHTING
HOME SCREEN
This is the default screen by clicking on the Shadow-
Caster
®
app icon after the onboarding process has
been completed.
Scenes can now be easily recalled by pressing a scene
button.
There are several preset scenes already congured.
An example of the Home Screen after the 'RYGCBM'
scene is recalled is shown below.
Note: 'RYGCBM' is short for Red/Yellow/Green/Cyan/
Blue/Magenta.
CONFIGURING ZONES
In the zone control box, there are two buttons.
Pressing the top button reveals a drop down selection
with three options: turn the zone off; select color
and brightness control; or select the currently active
program.
The lower button indicates the current color and
brightness or the current program. To change the color,
press the current color button and the color scroll bar
will pop up.
Slide the color bar to select any color, or select the
intensity slider to change the brightness.
Note: Multiple zones can be selected at the same time
to allow multiple lighting zones to be controlled and
and changed together.