Owner's Manual
Table Of Contents
- Installation & Operation Manual
- Product Info
- SCM-MFD-LC-KIT & SCM-PD-RELAY-4 with SCR Underwater Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT & SCM-SNLC with 6 Switch Inputs, Shadow-NET® Lights & 5 Zones of RGB Lights
- SCM-MFD-LC-KIT with 2 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 3 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with 6 Switch Inputs, Shadow-NET® Lights & 4 Zones of RGB Lights
- SCM-MFD-LC-KIT with Shadow-NET® Lights & 4 Zones of RGB Lights
SCM-MFD-LC-KIT
OPERATION MANUAL
Shadow-Caster
®
LED Lighting | 2060 Calumet Street. | Clearwater, FL 33765
p: 1+ 727.474.2877 e: info@shadow-caster.com w: shadow-caster.com
6
8. Once all the devices are found by the system, They
can be identied by clicking "Identify". All connected
lights will turn off, and the light being identied will
ash white slowly.
Once identied, set the lights to their desired zones.
Once selected press NEXT button to conrm.
6. Please make sure that all of the lighting devices
on the network are powered and connected. The
system will go through and identify everything that is
connected.
Once selected press NEXT button to conrm.
7. Select the required Operation Mode:
Full Mode (Recommended)
Full Mode allows individual control of all devices
connected to the Shadow-NET bus. This is the
recommended setting.
Global Mode
Global Mode only allows control of everything on the
bus as one channel. This is only required for working
with certain older technology underwater lights (pre
2018).
Once selected press NEXT button to conrm.