Owner's Manual

Standard Layout
SCM-MFD-LC-KIT & SCM-SNLC with 6 Switch Inputs,
Shadow-NET
®
Lights & 5 Zones of RGB Lights
Shadow-Caster® LED Lighting | 2060 Calumet St. | Clearwater, FL 33765
p: 1+ 727.474.2877 | e: [e-mail] | w: Shadow-Caster.com
REVISED
March 5th 2021
SCM-MZ-LC-6SW
Multi-Zone Lighting Controller
SCM-MFD-BRIDGE
MFD Communications Bridge
RGB
Zone 1
RGB
Zone 2
RGB
Zone 3
RGB
Zone 4
Shadow-NET
®
Enable
Control
Momentary
Switch
3.5mm Female Audio Jack
for music sync
SCM-AL
Supports up 30A of
RGB lighting
Multi-Function Display
4 X Channels of RGB Lighting
Supports up to 15A per channel
SCM-SCR Series Underwater Lights
Shadow-NET
®
output
to sync with other
Shadow-NET
®
devices
SCM-SNLC
(Includes 10A Fuse)
12V
Power Source
12V
Power Source
10-30V
Power Source
90W per
Underwater Light
RGB Zone 1
RGB Zone 2
RGB Zone 3
RGB Zone 4
On / Off
RECOMMENDED WIRE GAUGES
Scan the QR Code or
click here to view our
recommended wire
gauge chart.
HOW TO OPERATE
RGB Switches enables RGB Zones 1-4.
Shadow-NET Switch enables all lights
connected to Shadow-NET
®
.
Control Switch momentary push button to
change color and control brightness.
MFD control will override all switches.
SCM-SNLC DIP SWITCH SETTINGS
(from left to right counting up)
Not Used
1 2 3 4
Color
Master
(Normal Operation with
a Switch)
RGB
Not Used Blue/White only Listen only RGBW
This switch must be flipped
to allow ‘Listen Only’
SCM-MZ-LC DIP SWITCH SETTINGS
(from left to right counting up)
Zone 1 RGB
1 2 3 4
Zone 2 RGB Zone 3 RGB Zone 4 RGB
Zone 1 RGBW Zone 2 RGBW Zone 3 RGBW Zone 4 RGBW