Tus neeg siv phau ntawv
SWH - Movement Sensor Device - Installation and
configuration Manual
7/(7)
Prod. #
Doc. #
Rev
Date
Author
010103
03
A
16/03/2022
SMV
SGS - IOT COMPETENCE CENTER
This document and information contained in it are confidential and are the property of Société Générale de Surveillance (SGS). They may not in any
way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and
should be destroyed or returned to SGS when it is no longer needed.
5 SAFETY PRECAUTIONS
Follow the next safety instructions:
• Never submerge the device in any liquid.
• Keep the device in a dry place and away from any liquids that might spill.
• Do not let the electronic parts come into contact with any steel elements, to avoid injuries and burns.
• The gateway must not be modeled in any way.
• Do not place the gateway where the temperature is below/above operating range.
• Do not place the gateway close to objects with naked flames, heat source (oven or sunlight), cold source, liquid
and extreme temperature changes.
• Do not power on the gateway or connect it to another electrical device when installing.
• Check lightning and water protection when used outdoors.
• Do not connect or power the equipment using cables that have been damaged.
• Do not clean the gateway with detergents or solvents such as benzene or alcohol. To clean the device, wipe with
a soft moistened cloth. Use another soft, dry cloth to wipe dry.
FCC Information:
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.