Tus neeg siv phau ntawv

SWH - Movement Sensor Device - Installation and
configuration Manual
3/(7)
Prod. #
Doc. #
Rev
Date
Author
010103
03
A
16/03/2022
SMV
SGS - IOT COMPETENCE CENTER
This document and information contained in it are confidential and are the property of Société Générale de Surveillance (SGS). They may not in any
way be disclosed, copied, or used by anyone except as expressly authorized by SGS. The document should always be kept in a secure place and
should be destroyed or returned to SGS when it is no longer needed.
1 PRODUCT INTRODUCTION
Movement Sensor Device is a device designed to measure parameters that detect possible movement in the grain and
generates an alarm. The device consists of a board with an accelerometer that transmits data via LoRaWAN technology.
The main purpose of the device is to obtain these acceleration values when the device moves. The whole device is
shown in following figure:
1.1 MAIN FEATURES
The Movement Sensor Device has the following features:
• Compliance with LoRaWAN technology
• Frequency band: EU 868 / US 915 / AS 923 / AU 915 / KR 920 / IN 865 / RU 864
• Replace AA batteries 1.5V/Lithium 3.0V/3.6V
• Environment resistance: IP65
• Case dimensions:
TBD.
1.2 LORAWAN SENSOR
The following picture shows an overview of the movement sensor device.
1. Reed Sensor
2. Battery
2 QUICK START GUIDE
The main steps are listed for quick use. Please refer to the following sections for more details.