User guide

STUDIO SC USER GUIDE
Patching Functions
Patching a dimming channel
1. Press button Setup
2. Use the Up/Down arrows to scroll to Dimmer Patch menu
3. Press the right-hand Scroll button.
4. Press the Up/Down buttons to select the DMX channel (into the DMX-CH field) to be
assigned to the console’s control channel
5. Use the Left/Right arrows and move the cursor to the “CHANNEL” field
6. Set here the console’s control channel to be assigned to the DMX channel (if the values
weren’t preset, selecting the control channel automatically creates the LIM% and EQUAL
“fields”)
7. Use the Left/Right arrows and shift the cursor to the “Lim%” field and set the limiter
value to be applied to the control channel
8. Use the Left/Right arrows and shift the cursor to the “Equal” field and set the EQ curve
to be applied to the control channel
9. Press the button Setup to store the settings and exit Setup.
Patching a Unit (Fixture) to the Scan Control
1. Press button Setup
Use the Up/Down arrows to scroll to Unit Patch menu
1. Press the right-hand Scroll button
2. Press the Unit 1 button.
3. Press the right-hand cursor button to set the field to be modified
4. Shift the cursor to TYPE field and use the Up/Down buttons to select the desired
fixture.
5. Use the Left/Right buttons to select the FROM field (start address) and set the required
value
6. Check the configuration of the dip-switches on the display and set the fixture’s in the
same way
7. Repeat from above item 4 to patch new fixtures taking care to press the following Unit
button (i.e. for the second fixture press Unit’s button 2)
8. Press the button Setup to store the configuration and exit Setup.
SGM Light Technology 12/12/2000 Ver. 2.04
15