User guide

PILOT 2000 USER GUIDE
Reset button:
It enables the remote Reset control of a fixture. Furthermore it can be used as follows:
Psycho: when put on zero; the light output of all the dimming channels set on a given
sound frequency band
Preset: when put on zero; the light output of all the dimming channels
Chase: when put on zero; the light output of all the dimming channels of the selected
Chase’s step
Page Button
Page button:
It is possible to switch the Multifunction Keyboard on two pages. When the button is not
pressed (LED not lit), the Multifunction Keyboard shows the buttons 1-20; with the button
pressed (red LED lit) the Multifunction Keyboard shows the buttons 21-40.
Programming Keyboard Section
The key buttons and the light blue printing identify this section.
This section comprises all the keys and the functions associated with them, which allow
you to edit and set the running times and general output levels of the elements that make
up the Memory Objects.
Store button:
When pressed, it enables you to store the steps of a Program or a Chase and modification
made on the Memories.
Edit button:
It enables you to create new Programs, Chases, Psychos and Presets.
Levels button:
It enables you to set the DMX values to Programs, Chases, Psychos and Presets.
Times button:
It enables you to set the running time to Programs, Chases, Psychos and Presets.
Memory Button
Memory button:
There are 40 Memories available. Each memory can contain and run at the same time 4
different Programs; 4 different Chases; 4 different Presets and 4 different Psychos.
It is used to recall Memories.
6
SGM Light Technology 30/06/2000 Ver. 2.03