User guide

PILOT 2000 USER GUIDE
Patching
Total Dimmer Channels
This function allows operators to decide how many DMX channels must be assigned to the
dimmer channels.
Pilot 2000 can control a minimum of 6 channels up to 192 channels, divided into 32 pages
on the display. To avoid patch conflict, set the Total Dimmer Channels before to patch the
Extra channels and Unit channels.
1. Press the Setup button.
2. Scroll with the up/down arrows until “Total dimmer channels” appears on the display.
3. Press the right-hand Scroll button .
4. Only “N. Pages” field can be modified by using the UP/DOWN arrows while the
“Channels” field will show how many dimming channels can be used according to the
value inserted into the “N.Pages” field.
5. Press Setup button to store the settings and leave Total Dimmer Channels Menu.
Patching Dimming Channels
WARNING!
To avoid patching conflict, don’t let the Dimming channels to overlap the Unit Channels
or the Extra Channels
1. Press the Setup button.
2. Scroll with the up/down arrows until “Dimmer Patch” appears on the display.
3. Press the right-hand Scroll button .
4. Press the UP/DOWN button to set in the “DMX-CH” field, the DMX channel to be
patched to the board’s control channel
5. Using the Left/Right arrows, move below the “Channel” field and set the board’s
control channel to be linked to the DMX channel
6. Using the Left/Right arrows, move below the “Lim%” field and set the limiter value to
be applied to the control channel
7. Using the Left/Right arrows, move below the “Equal” field and set the equalization
curve to be applied to the control channel
8. Press Setup button to store the settings and leave Dimmer Patch Menu
SGM Light Technology 30/06/2000 Ver. 2.03
11