Specifications
SGM Elettronica - Light Technology GB
User's manual 1.01 - 6 - Palco 3 - Palco 5
Safety information
Read the instructions in this manual carefully, as they give important instructions regarding installation, operation and
maintenance safety.
This manual must be kept with the fixture for future consultation. In the event of the fixture being sold or
passed to another user, always make certain that the booklet is with the unit, to enable the new owner to
be informed on its operation and relative care.
¨ Unit not for home use; only for professional use.
¨ After having removed the packaging, make certain the unit is not damaged in any way. When in doubt, do not
use the unit, and contact an authorized SGM Technical Assistance Centre.
¨ The various part of the packaging (plastic bags, polystyrene foam, nails, etc.) must not be left within children’s
reach, as they are potential sources of danger.
¨ The unit must only be used by adults. Do not allow children to tamper with or use the product.
¨ Fixture installation work must be carried out by experienced qualified staff.
¨ Avoid using the fixture in locations subject to vibrations, or possible impacts
¨
Avoid using the fixture in locations in which the temperature is above 45° or below 2°C
¨ Do not attempt to dismantle or modify the fixture.
¨ The fixture must be kept at a minimum distance of 1.5 metres from surfaces to be illuminated.
¨ In the event of serious problems or faulty operation, switch off the fixture and immediately contact the nearest
SGM Technical Assistance Centre or contact the manufacturer directly.
¨ Do not open the fixture: there are no user-repairable parts inside.
¨ Never try to repair the fixture personally. Repairs carried out by unauthorized staff can cause damage or faulty
operation. Always contact the nearest authorized Technical Assistance Centre.
Safeguard the environment: do not throw away the remaining packaging: consign them to your dealer, or
a special waste collection point.
General Warranty Conditions
The unit is guaranteed for 12 months from the date of purchase against manufacturing faults of the
unit or the material it is made from
Faults or breakdowns caused by inexperienced or incorrect use of the unit are not covered by the
guarantee
The guarantee will be considered null and void if the unit has been opened or tampered with by
unauthorized personal
The guarantee does not foresee the replacement of the unit
External components such as handles, switches and removable parts are excluded from the guarantee
Transport costs and consequent risks are the responsibility of the unit’s owner
The validity of the guarantee is effective to all effects only on presentation of the guarantee to the
manufacturer or the SGM technical assistance centre
Always quote unit serial number and model when contacting the dealer for information or assistance










