Specifications

GB SGM Elettronica - Light Technology
Palco 3 - Palco 5 - 41 - User's manual 1.01
Accessories
Installing optional lenses
Palco can be fitted with various types of front lenses, in order to obtain different beam aperture angles. The following
procedure must be followed in the event of the front lenses having to be changed on the LED matrix
Removing the front lens panel
Remove the screws on the rear of the Palco’s head (used to fix the head’s top edge to its bottom edge), using a 3mm.
hex key
Rotating the two shells toward the front of the fixture, the front glass can be removed for access to the lens-holder
panel.