Specifications

SGM Elettronica - Light Technology GB
User's manual 1.01 - 38 - Palco 3 - Palco 5
Step 3 - CHOOSING THE DAY
1. Use the UP key to pass to the “DAY=MON” menu
2. Press “Enter” and “DAY=” will begin to flash
3. Use the UP/DOWN keys to choose the day of the week on which the event
must begin. The days of the week are expressed as follows:
- ALL Every day
- MON Monday
- TUE Tuesday
- WED Wednesday
- THU Thursday
- FRI Friday
- SAT Saturday
- SUN Sunday
4. Press “Enter” to exit the DAY menu and confirm
Step 4 - START TIME
START TIME is used to configure: the hour, minutes and seconds in which an event containing a previously prepared
program will start.
1. Use the UP key to pass to the “START_h=0” menu
2. Press “Enter” and “STIME_h=” will begin to flash
3. Use the UP/DOWN keys to choose the hour at which the program has to start
(from 0 to 23)
4. Press “Enter” to exit the “START_h” menu and confirm
1. Use the UP key to pass to the “START_m=0” menu
2. Press “Enter” and “START_m=” will begin to flash
3. Use the UP/DOWN keys to choose the minutes at which the program has to
start (from 0 to 59)
4. Press “Enter” to exit the “START_m” menu and confirm
1. Use the UP key to pass to the “START_s=0” menu
2. Press “Enter” and “START_s=” will begin to flash
3. Use the UP/DOWN keys to choose the seconds at which the program has to
start (from 0 to 59)
4. Press “Enter” to exit the “START_s” menu and confirm
DAY=FRI
START_h=21
START_m=15
START_s=30