Specifications

GB SGM Elettronica - Light Technology
Palco 3 - Palco 5 - 35 - User's manual 1.01
Step 9 - SCENE TIME
Each scene in a program can be run with the required times. There are two types of scene times:
Total scene time (STIME), expressed in hours, minutes and seconds
Scene fade time (FTIME), expressed in hours, minutes and seconds
The scene time is the total time occupied by the scene in the program, whereas fade time is the time taken by the
scene’s channel status to reach the appropriate level.
The STIME menu gives access to the adjustment of the total scene time. The time can be configured in hours, minutes
and seconds
1. Use the UP key to pass to the “STIME_h=0” menu
2. Press “Enter” and “STIME_h=” will begin to flash
3. Use the UP/DOWN keys to choose the number of hours the current scene has
to last.
4. Press “Enter” to exit the “STIME_h” menu and confirm
1. Use the UP key to pass to the “STIME_m=0” menu
2. Press “Enter” and “STIME_m=” will begin to flash
3. Use the UP/DOWN keys to choose the number of minutes the current scene
has to last.
4. Press “Enter” to exit the “STIME_m” menu and confirm
1. Use the UP key to pass to the “STIME_s=0” menu
2. Press “Enter” and “STIME_s=” will begin to flash
3. Use the UP/DOWN keys to choose the number of seconds the current scene
has to last.
4. Press “Enter” to exit the “STIME_s” menu and confirm
STIME_h=2
STIME_m=10
STIME_s=30