Specifications

GB SGM Elettronica - Light Technology
Palco 3 - Palco 5 - 33 - User's manual 1.01
Step 2 - CHOOSING THE SCENE NUMBER
1. Use the UP key to pass to the “SCENE=1” menu
2. If it is necessary to create a program other than number 1, press “Enter”
again and “SCENE=” will begin to flash
3. Use the UP/DOWN keys to choose the required scene number from 1 to 5,
then Press “Enter” to exit the SCENE menu and confirm.
Step 1 - CHOOSING THE FIXTURE NUMBER
1. Use the UP key to pass to the “FIXT=ALL” menu
2. Press “Enter” and “FIXT=” will begin to flash
Use the UP/DOWN keys to choose:
- ”ALL” if the scene to be created involves all fixtures (MASTER + SLAVES).
- ”MSTR” if the scene to be created involves just the Master fixture.
- ”ODD” if the scene to be created involves the odd-numbered fixtures.
- ”EVEN” if the scene to be created involves the even-numbered fixtures.
- “SLV1” - “SLV29” if the scene to be created must have each slave fixture with its
own channel status, chosen individually
3. Press “Enter” to exit the FIXTURE menu and confirm
Step 4 - SHUTTER
1. Use the UP key to pass to the “SHUTT=100%” menu
2. Press “Enter” and “SHUTT=” will begin to flash
3. Use the UP/DOWN keys to choose the required value of the shutter channel
for the current scene.
4. Press “Enter” to exit the SHUTTER menu and confirm
Step 5 - DIMMER
1. Use the UP key to pass to the “DIMMR=100%” menu
2. Press “Enter” and “DIMMR=” will begin to flash
3. Use the UP/DOWN keys to choose the required value of the dimmer channel
for the current scene.
4. Press “Enter” to exit the DIMMER menu and confirm
SCENE=1
FIXT=ALL
FIXT=ODD
FIXT=EVEN
FIXT=MASTR
FIXT=SLV12
SHUTT=100%
DIMMR=100%