Specifications

SGM Elettronica - Light Technology GB
User's manual 1.01 - 12 - Palco 3 - Palco 5
Specifications
Mechanical
Fixture made up of a twin body: Base + Head.
The base is made up of a die-cast unit containing the power supply, display, three buttons and three watertight cable
glands for mains supply and DMX cables.
The base is built for floor or wall mounting via screw plugs, has two Fast-Lock holes for fitting a clamp for truss
mounting, and can also be floor-mounted (or on any other flat surface) without fixing, remaining steady no matter what
the angle of the head.
The head is made up of a radiator (in drawn aluminium), on which the LED matrix and lenses are fitted. The head can
be moved in relation to the base: PAN +/- 45° and TILT -75° (backwards) +15°(forwards). The head has stop screws to
block PAN/TILT in the required positions.
Protected to: IP65.
Material resistant to weather and any acts of vandalism (shatter-proof glass)
Dimensions:
300
375
425
229
356
253
 Weight: 13.5 kg
Electrical
Palco 5
 Luminous power: 150 Watts
 Power absorbed: 195 Watts
Palco 3
 Luminous power: 100 Watts
 Power absorbed: 130 Watts
Full-range PFC power supply (does not distort the mains power supply):
90-270V AC, 50-60 Hz
User interface: LED display 1x10 alphanumerical digits, panel with three buttons.