User`s guide

Hardware Replacement Procedures

007-5483-001 71

Replacing the AOC-SIMSO (BMC) Daughter Card

The AOC-SIMSO daughter card (BMC) resides in a slot attached to the node board. The

rear panel BMC LAN port is connected to the BMC using a short USB cable.

1. Remove the graphics card in accordance with the instructions on page 69.

2. Press the retaining bracket arms apart and gently lift the end of the daughter card

that is not in the bracket (refer to

Figure 3-12, A).

3. Disconnect the daughter card from the node board connector and remove the

daughter card (refer to

Figure 3-12, B).

Figure 3-12 BMC Daughter Card Removal

AOC-SIMSO

card (BMC)

Bracket