User`s guide

70 007-5483-001
System Procedures
Note: Step 3 is not required for the NVIDIA Quadro FX 1700 graphics cards.
3. If necessary, remove the three screws that secure the graphics card to the chassis air
baffle (refer to
Figure 3-11, B).
4. Remove two screws (refer to Figure 3-11, C) that secure the graphics card to the rear
panel.
5. Unseat the graphics card from the PCI riser board connector and lift the card out of
the chassis (refer to
Figure 3-11, D).
6. Place the graphics card on and ESD-safe worksurface.
Figure 3-11 Graphics Card Removal
A
B
C D