User`s guide

Hardware Replacement Procedures
007-5483-001 69
Replacing the Chassis Fans
1. Remove the side cover from the chassis in accordance with the instructions on
page 66.
2. Remove two screws (refer to Figure 3-10) that secure the fan assembly to the chassis.
3. Disconnect the fan power cables from the node board.
4. Remove the fan assembly.
Figure 3-10 Cooling Fans Removal
Replacing the Graphics Card
Note: The power cable may be plugged into a different location than the power cable
shown in Figure 3-11.
1. Remove the side cover from the chassis in accordance with the instructions on
page 66.
2. Disconnect the graphics card power cable (refer to Figure 3-11, A).
Screws
Chassis cooling fans