User`s guide

68 007-5483-001
System Procedures
Replacing a Disk Drive
Note: Halt the operating system before replacing a disk drive. Disk drives can be
hot-plugged while the system is in operation in a rack. Have the replacement disk drive
ready, so that it can be installed quickly without disrupting the airflow through the
chassis.
1. If necessary, remove the front bezel from the system in accordance with the
instructions on
page 64.
2. Release the latch on the front of the disk drive carrier (refer to Figure 3-9).
3. Pull on the black lever to unseat the drive and slide the it out of the chassis.
Figure 3-9 Disk Drive Removal