User`s guide

64 007-5483-001
System Procedures
Hardware Replacement Procedures
Before You Begin
Before working with your server product, pay close attention to “Warnings and
Cautions” on page 4.
Tools and Supplies Needed
• Phillips (cross head) screwdrivers (#1 bit and #2 bit)
• Needle-nosed pliers
• Antistatic wrist strap and conductive foam pad or ESD-safe worksurface
Removing the Front Bezel
Remove two screws that secure the front bezel to the rack (Figure 3-5) and remove the
bezel.
Figure 3-5 Front Bezel Removal
virtu vn200
sgi
Front bezel