User`s guide

Virtu VN200 Graphics Node
007-5483-001 23
Virtu VN200 Graphics Node
Each Virtu VN200 graphics node (refer to Figure 2-3) contains the hardware components
listed below:
• 1 Supermicro® X7DWT-INF node board that uses the Intel 5400 Seaburg chip set
(same node board used in SGI Altix XE320 servers)
• 2 Intel® Xeon® quad-core 5400 sequence processors with 1333- or 1600-MT/s FSB
• 2 to 8 800-MT/s FB-DIMMs
• 2 Gigabit Ethernet ports (GLAN 1 and GLAN2)
• 1 BMC LAN port available from GLAN 1
• 1 4x DDR InfiniBand interface
• 1 PCIe x16 Gen2 graphics board
• 1 AOC-SIMSO IPMI interface board
• 1 or 2 internal 80-, 120-, or 160-GB SATA JBOD disk drives
• Redundant 1000 watt power supplies
Figure 2-3 Virtu VN200 Graphics Node
Front panel
Rear panel
System disks
Power supplies