User`s guide

90 007-5483-001
System Procedures
Replacing the Node Board
1. Remove the graphics card in accordance with the instructions on Figure 3-11.
2. Remove the air baffles (refer to Figure 3-18).
Figure 3-18 Air Baffles
3. Remove the BMC daughter card in accordance with the instructions on page 71.
4. Remove the PCI riser board in accordance with the instructions on page 72.
5. Remove the memory DIMMs in accordance with the instructions on page 74.
6. Remove the heatsinks and processors in accordance with the instructions on
page 75.
7. Disconnect the SATA and power cables that attach to the node board.
8. Remove the screws that secure the node board to the chassis.
Screws
Air baffle