User`s guide

3-24 Paper Handling
OG L
2. Select desired paper tray to adjust the table height. If the paper weight in the tray
is less than 75g/m
2
, select the “Thin” button. If the paper weight is 75g/m
2
or
above, select the “Thick” button.
Figure 3-29. Setting the Table Adjust (2)
3. Change the Table Adjust setting refer to following guidelines, and touch the “”
button.
■ If “Paper Jam xxxx” is occurred, change to “+1”. If “Paper Jam xxxx” is not
solved, change to “+2”.
■ If “Double Feed Jam xxxx” is occurred, change to “-1”. If “Double Feed Jam
xxxx” is not solved, change to “-2”.
The display returns to the Select Paper Source screen and Table Adjust setting
you have entered are displayed.
Figure 3-30. Setting the Table Adjust (3)
0 4